Sunday, January 24, 2010

8,000 Mile Service on ZX-9R

Due to the recent awful weather conditions Helen and I haven’t been able to go out on the bikes at all, which has really annoyed us both.



Front Brake Lines Due to this I decided that it would be an ideal time to take the ZX-9R to bits and carry out some of the maintenance tasks required. The main thing that needed doing was the 8,000 mile valve check. To get to the top of the engine you need to remove various things including 2 of the ram-air pipes. To access these and remove them from the frame I had to take of all the side panels and the front nose cone assembly including windscreen off the bike.



Once I had removed them and the fuel tank I was able to start removing all of the other things in the way. I removed the air filter box and then I removed the carbs, once I had removed some more pipes and wiring it was then possible to access the top of the Rear Brake Linesengine. I removed the head and then performed the valve check on the engine. Possibly because this was the first time this has ever been done, I found that 11 out of the 16 were out of spec (all tight). I was able to sort out 3 of them via swapping out with some of the other valves shims, but had to order the rest in. I got them off Ebay for around £2 each rather than the £8 that Kawasaki wanted for them.



After I had put the bike back together I installed 2 more carb take offs for cylinders 2 and 3, which then enabled me to synchronise the carbs. They were a little bit out but with a little bit of fiddling I was able to pretty much get them back in sync.



While I had all the bodywork off I also installed some blue Hel braided brake lines. I used the 2 full length race line kit for the front and the standard single line for the rear. It was a complete nightmare bleeding the brakes and took what seemed like forever to complete. But once complete it, I was very happy with the feel of the brake lever and pedal. The old brake fluid probably couldn’t have helped as I guess it was probably the original stuff from the factory.

Read more...

Sunday, November 01, 2009

FZ1 Fazer Test Ride

Helen tested a demo model 2009 FZ1 Fazer yesterday at Keith Dixon in Accrington.  She expected to love it but she didn’t click with it in the same way she did on her first ride of her BMW or on my VFR…and Mr Sale Yamaha you were wrong, it didn’t make her smile but the VFR does! 



This is Helen’s review of the FZ1 Fazer



Loved:-


The engine – nice and punchy, sounded gorgeous, pulled well and overtakes were an effortless hoot, felt miles more powerful than both the VFR and mine.


 
The gearbox – nice and smooth, never missed a gear and I wasn’t up and down the box like I am on mine.


 
Steering – very agile, turned really well and I felt confident cornering and turning at slow speeds, very well balanced.


 
Part-ex price they offered for mine – about £400 more than the bloke at Sale Yam, and a couple of hundred more than book price gives for 3.5k miles less than mine has.


 
Price for the bike – decent price compared to the tatty 07 plate at Sale Yam which was almost £6k, and it had done just 21 miles after being pre-reg in August (plus the 30 odd I put on it today!) – if anyone’s after one go and check this one out!


 
Didn’t love:-
Riding position – too upright, bars a bit too high for me and I felt a bit exposed and plonked on top (like driving a sports car perched on a bar stool!), rather than at one with the bike, didn’t feel natural gripping the tank with my knees, the ergonomics just didn’t go with my thighs and knees!


 
Seat – uncomfortable compared to mine and the VFR, and I don’t think I could cope with a long day on it.  Although I wasn’t leant forwards, the shape of the seat kind of tilted my pelvis so I wasn’t sitting on the bit of the body we’re meant to sit on (which made for very uncomfy lady-bits!).


 
Suspension – felt very hard and was rough over some of the sunken grids and pot holes you always seem to hit no matter how hard you look for them (I’d have to add some more sports bras to my wardrobe if I bought a Fazer!).



Cost of extras – to get up to the accessories/gadgets standard of my BMW it’d cost me another £1.5k on top of the £4k I’d have to give them in addition to part-exing my bike (fairing lowers, touring screen, crash bobbins, heated grips, luggage, oh and the new sports bras!).


 
I can definitely see how some folk love them, but it just wasn’t for me, we just didn’t click.  Getting back on the VFR and then back on mine on the way home was what really made me smile, I’ve forgiven mine after falling out with him post-VFR riding, and I know that the VFR with higher bars is likely to be the perfect combination for me.

Read more...