Saturday, May 03, 2014

Pacsafe Lidsafe

Pacsafe Lidsafe01We have recently purchased a pair of Pacsafe Lidsafe bags to put our helmet’s in when we are away from the bikes. We will only likely use them when we are touring and the topboxes are full. We felt we needed to buy these as we love our Pacsafe Stuffsafe and neither of our bikes have helmet hooks fitted to them. There is nothing worse than having to lug all your bike gear with you when you go and visit a castle in the hot sun. 

Helen’s Z1000SX doesn’t have any hooks under the seat and my K1300S hooks were part of the rear grab handles. These handles were removed when I fitted the topbox rack. Last year Pacsafe Lidsafewe were able to use the hooks under the seat on Helen’s old VFR. But obviously the helmets will be far safer in these bags with the eXomesh® protection and on the plus side they will also now be in a waterproof bag. They pack down to around the size of a pint glass and don’t really weigh anything ever. They will easily fit in our topboxes and also help stop gear in the topboxes moving around. It would appear that both of these products are now discontinued so if you want either I would buy them now while you still can.

Read more...

Garmin Audio

Autocom Unit Although it was nice and sunny today I decided to do some work on my bike rather than go out for a ride.

So I installed the audio lead from the Garmin audio out jack to my Autocom. Before I installed it I checked to make sure that it worked first and that no bike noise was induced into my headphones. All worked well so I went about stripping the bike down and removing the petrol tank again as well. The install went ok and the new lead was plenty long enough to route around the bike. I managed to install the lead’s isolation box on top of the Autocom unit, it just fitted in. I then put the bike back together and all seems to work perfectly and the volume is just right. The minor downside is that the install at the Garmin end isn’t as neat as it was before, but at least I have sound now.

Satnav MountI also installed the slightly larger Ram mount bracket that I used to use with my TomTom satnav. This has lifted the Garmin slightly higher up and in my opinion is a much better location as I don’t have to look down as much. The dials are all still perfectly visible as well over the top of the Garmin, so it is a win win situation all round.

Read more...